本帖最後由 翊Muk|| 於 7-4-2010 10:28 編輯
事先聲明
驚整壞電腦 可以唔用
有咩Side effect 本人唔會負責
TCP/IP Optimizer 寬頻極限加速 詳細解說教學這個是美國很有名的更改微軟Windows作業系統的registry和MTU的網站以達到各種速度的最佳化
教學做法如下>Windows 98, Windows Me, Windows 2000, Windows XP皆適用
首先 你的電腦一定要有Winzip8.0以上版本的壓縮軟體
第1步驟:連到http://www.speedguide.net
後往左看第二個選項Download\Patches點下去:
Windows 98 的需要的檔案:
mtupatch98.zip
sguide_tweak_98_ME
sguide_tweak_98_ME_PPPoE
SpeedGuide Web Patch
Windows Me 的需要的檔案:
sguide_tweak_98_ME
sguide_tweak_98_ME_PPPoE
SpeedGuide Web Patch
Windows 2000/XP 的需要的檔案:
sguide_tweak_2k.zip
sguide_tweak_2k_pppoe.zip
SpeedGuide_2k Web Patch ( sg_webtweak_2k.zip )
winxp_dnscache.reg ( winxp_dnscache.zip )
以上的程式解壓縮後 只要執行reg檔就好 其餘不用理
第2步驟:
Windows 98, Windows Me, Windows 2000, Windows XP皆適用
請到http://www.speedguide.net主頁去
看到TCP/IP Analyzer 點下去 分析你的網路一些設定值
查一下你的 Default Receive Window (RWIN) = 256960 , 有沒有達到256960這個數值
如果沒有 請按TCP/IP Analyzer 旁的 TCP/IP Optimizer 下載這個修正程式 , 然後執行它
它會出來一個視窗
視窗中間 勾選Modify All Network Adapters
視窗下面 勾選Optimal settings
然後令到↓到達6000速度 (留意是不是256960)留意重點
RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
64240 (up to 2 Mbit lines, depending on latency. MSS * 44)
128480 (1-5 Mbit lines, depending on latency. MSS * 44 * 2)
256960 (2-14 Mbit lines, depending on latency. MSS * 44 * 2^2)
513920 (8-30 Mbit lines, depending on latency. MSS * 44 * 2^3)
1027840 (25-60 Mbit lines depending on latency. MSS * 44 * 2^4) <-- current value
| |
正常是調到6000 (除非可以超過十M)
本人係HKBN100MB 所以拉到最盡 雖然係for 25-60MBIT LINES
再按 Apply changes
然後重新開機,再按TCP/IP Analyzer測試一下
應該Default Receive Window (RWIN) = 256960 的值會是256960 才對
如果不是256960 這通常會出現在Windows 98裡 應為它少一個程式
所以如果你的作業系統是Windows 98 請在第一步驟 相同網頁的中間位置
下載MS Vtcp.386 fix for Windows 98這個程式解壓縮後執行 再重新開機
----------------------------------------------------------------
以下係另一方法
大慨係強制禁止你開機時會啟動既程式
如果大家真係專心玩FS 又唔想開其他野
去開始--->執行打msconfig---->啟動,靜係tick左ctfmon(e個一定要tick)
其他全部唔好tick<---不過大家可以自己衝量 例如msn等等 大家要用既software可以照tick左佢
我2樣做齊 對我係順左 希望幫到大家 |